Pig Diverter Shutter Valve
Further information please refer to the datasheet in PDF format.
Pig Diverter Shutter Valve
Ideal for hygienic pigging processes
LAUFER pig diverter shutter valves have been designed according to hygienic design guidelines to meet the high demands of process engineering applications. They build upon the same design principle as free flow shutter valves. By virtue of this principle no products remain in the valves during operation.
The prime use of LAUFER pig diverter shutter valves is with sterile pigging systems as they can be disassembled easily and quickly even when welded in place, and additionally, offer high CIP capability.
Features
- No dead pockets
- EHEDG-certified CIP/SIP capability (hygienic design)
- Totally clear passage - no pressure loss
- No product remainders or sticking of solid particles
- Designed to be passed with DMV lip pigs
- Compact design for 90° installation
- Minimum number of components and wearing parts
- Can be completely dismantled even when welded in place
- 3-A 51-01 and FDA compliance
- CRN
Operating positions
Pig Diverter Shutter Valve
Technical Data Overview
| Nominal sizes: | |
|---|---|
| Inch | DIN |
| 1.5" | DN40 |
| 2" | DN50 |
| 2.5" | DN65 |
| 3" | DN80 |
| 4" | DN100 |
| Materials: | |
|---|---|
| Inox parts in contact with product: | AISI 316L (1.4404 / 1.4435) |
| Other inox parts: | AISI 304 (1.4301) |
| O-ring seals: | EPDM, FKM (Viton®)‚ FEP, other grades upon request |
| Shutter: | Dyneon™ TFM1600 |
| Surfaces: | |
|---|---|
| In contact with product: | Ra ≤ 32µin (Ra ≤ 0.8 µm) |
| Temperature: | |
|---|---|
| Operating temperature: | 230°F (110°C) |
| Short-term: | 284°F (140°C) - optionally up to 392°F (200°C) |
| Operating pressure: | |
|---|---|
| Pressure behind arc: | 145 psi (10 bar) - optionally up to 290.1 psi (20 bar) |
| Pressure against arc: | 43.5 psi (3 bar) |
| Versions: | |
|---|---|
| 3-way (3 x 120°) | |
| Operation: | |
|---|---|
| Manual: | with handle (3 locking positions) |
| Pneumatic: | horizontal pneumatic actuator (aluminium housing) |
| Valve connection: | |
|---|---|
| Clamp connection: | Tri-Clamp |
| Welded ends: | Inch, DIN |
| Male connection: | DIN 11851 |
| Further options: | |
|---|---|
| |
